Did you know that you may install an Ubuntu server image just from a pendrive?
I downloaded the image, inserted a pendrive (be aware, it will be totally erased)...
dmesg
---------------------------------------------------
[25003.567296] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[25003.676610] usb 2-1.4: New USB device found, idVendor=03f0, idProduct=5307
[25003.676617] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[25003.676622] usb 2-1.4: Product: v165w
[25003.676627] usb 2-1.4: Manufacturer: HP
[25003.676631] usb 2-1.4: SerialNumber: 00000000000064
[25004.248877] Initializing USB Mass Storage driver...
[25004.249075] scsi4 : usb-storage 2-1.4:1.0
[25004.249243] usbcore: registered new interface driver usb-storage
[25004.249247] USB Mass Storage support registered.
[25005.249142] scsi 4:0:0:0: Direct-Access hp v165w 0.00 PQ: 0 ANSI: 2
[25005.249627] sd 4:0:0:0: Attached scsi generic sg3 type 0
[25005.250955] sd 4:0:0:0: [sdc] 7892040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[25005.251674] sd 4:0:0:0: [sdc] Write Protect is off
[25005.251683] sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
[25005.252410] sd 4:0:0:0: [sdc] Asking for cache data failed
[25005.252417] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[25005.256280] sd 4:0:0:0: [sdc] Asking for cache data failed
[25005.256287] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[25005.746065] sdc: sdc1 sdc2
[25005.749229] sd 4:0:0:0: [sdc] Asking for cache data failed
[25005.749236] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[25005.749243] sd 4:0:0:0: [sdc] Attached SCSI removable disk
---------------------------------------------------
... that it was identified as a /dev/sdc, then I saved the image into the pendrive:
---------------------------------------------------
cat ubuntu-12.04.2-server-amd64.iso > /dev/sdc
---------------------------------------------------
Just like that! Boot your server and enjoy!
